NEWS CENTER
The company has always adhered to the "integrity, team, hard work, innovation" concept of the company, and constantly
surpass themselves. In line with the purpose of taking advantage of the society and serving the society, we will develop
together with our friends.
Functional beverage label manufacturers introduce the method of label paper dislocation recovery
time:
2020/06/28
Source:
Network
Functional beverage label manufacturers : What if the label paper is misplaced?
Manually measure paper as follows:
1. Press the PAUSE button on the printer with your left hand and turn on the printer with your right hand;
2. When the machine starts to spit paper, release the PAUSE button with your left hand;
3. the machine starts to walk, the paper measurement is not completed until the paper is stopped;
4. Press the FEED key (the one below) to see if it is a sheet of paper, and if it is a multi-column tag sheet, it is 1.
5.the labels set in the sticker printing software will shift through the printer, usually in the following situations:
1. functional beverage label manufacturers: the paper size is not set correctly in the sticker software. There are some slight differences in the setting methods for different printer software, which is likely to be the printing offset caused by the difference in setting methods.
In the label printing software, to consider the size of a row of labels as the paper size (excluding the exposed margins on the left and right of the backing sheet), the margins are all 0 in the Layout setting. For example, the label paper is 3 rows of roll paper, the individual size is 30*25, and the row spacing is 2. Then when setting the paper size, it is 100m wide and 25mm high. In "Layout", enter 1 row and 3 columns, and the margins are all 0. Note that the size of a single label is checked and entered 30mm * 25mm.
2. functional beverage label manufacturer: incorrect paper measurement by adhesive printer sensor
the size set in the printing software is normal or offset, check the sensor to measure the paper. After replacing the paper or carbon tape, be sure to do "calibration" (or printer self-calibration), so that the printer automatically recognizes the current paper size. After the calibration paper (measuring paper) operation is done, click "test page" in the printer properties to observe whether the printed content is offset.
If the printed content is offset, please observe the offset and offset direction of each sheet.
1. if the left and right offset or print a blank sheet of paper separated by several sheets, or print in the middle of two labels, the printer paper size is not set properly. Modify the paper size in the printer project to be the same as the paper size (actual size) in the software. If this size option is not available, create a custom size directly.
2. If you gradually shift up or down
Set the paper source or media type to: Spaced label in the printer item.
3, clean the sensor. functional beverage label manufacturer: if all the above methods have been tested and still fail, clean the sensor (or sensor, printer automatically detects paper accessories). Then perform "self-verification-print test page", which 1 the process. basically, when using self-adhesive printing software and connecting the printer for printing, the phenomenon of printing position deviation or printing a blank label separated by several sheets can be solved by the above methods. If it still cannot be solved, you can contact the printer technology side for help.
Related News
2020-06-12
The convenience of label and the development of label printing
The emergence of labels has greatly improved work efficiency and accelerated the pace of urban life. In the face of various printing methods, in order to shorten the equipment debugging time, improve productivity, improve product quality to a certain extent, and meet the needs of customers, label printing factories generally classify products according to different grades and different batches of daily necessities. Then use different printing methods for printing.
2019-08-05
Under the background of "new engineering", the training of printing professionals has new ideas!
In order to study, publicize and implement Xi Jinping's thoughts on socialism with Chinese characteristics in the new era and the spirit of the 19th National Congress of the Communist Party of China, implement the deployment of the National Propaganda and Ideological Work Conference, and undertake the mission of "raising the banner, gathering people's hearts, cultivating new people, promoting culture, and exhibiting image" The printing industry better serves the prosperity and prosperity of my country's socialist culture and leads high-quality development. The National Press and Publication Administration hosted the China Printing Industry Innovation Conference, build a political position that dominates development and a service platform for collaborative innovation. The theme of this year's conference is "focusing on greening", organizing and mobilizing the strength of the whole industry to jointly participate in the preparation and holding of the conference, preaching policies and regulations, and informing development
2019-08-05
Break down technical barriers! China's inkjet print head can no longer rely on foreign technology
A few days ago, the ZTE incident came to life after a storm. This crisis without gunpowder smoke has triggered a discussion among Chinese people about independent core technologies. In fact, in the 3D printing industry, there are many domestic technology subject to foreign, piezoelectric inkjet print head is one of them. China's "storm" strong counter-attack piezoelectric inkjet print head in the sand 3D printer, as the chip in the semiconductor, the importance is self-evident. Previously, companies such as German Voxeljet and Exone in the United States have already had relatively mature commercial applications in sand mold 3D printing technology, while Chinese companies limited to nozzles have few brands.
2019-08-05
Digital printing will cross the label, rapid development in all areas of packaging
Mr. MichaelFairley believes that label processors still have time to find new business opportunities in the production of flexible packaging and folding cartons with their understanding, expertise and skills in digital printing. At the 2019 Asia International Label Printing Exhibition (LabelexpoAsia2019) held at the Shanghai New International Expo Center from December 3 to 6 this year, about 30 digital printing equipment-related manufacturers participated in the exhibition, including: u.S. Amica (Amica), Domino, Dilli, Haotian, Konica Minolta, Runtianzhi, Yunbo (Shanghai) Internet of Things Technology, Changzhou Temine, Hefei Runjie, Nebula Computer (GCC), Hanhua Industry, Saikang, Zhuo Jue, Dragan and Ningbo Worry, etc. Among these exhibitors, the use of inkjet technology accounts for the vast majority, thanks to the rapid development of nozzle technology, the improvement of printing materials and ink formulations, and the unprecedented progress made by color inkjet printers in terms of performance and market applications. The development of digital printing in the label industry has been more than 20 years. The first to enter this field was toner technology, followed by inkjet technology, and now Landa's nano digital printing technology. This is 20 years of rapid development. So far, the global label industry has installed about 4500 digital printing machines, of which HPIndigo and Saikang toner printing machines account for more than 2/3 of the total installed capacity.
Head office: Guangzhou Guangcai Label Co., Ltd.
Address (Add): No.2, Wei Da Lu, Dazhou Village, Shibi Street, Panyu District, Guangzhou
Foshan Branch: Guangdong Guangcai Label Co., Ltd
Address (Add): 8th Floor, Building 15, Haichuang Dazu Robot Manufacturing Center, No. 3 Erzhi Industrial Avenue, Xihai Village, Beijiao Town, Shunde District, Foshan City
Shanghai Branch: Guangcai Label (Shanghai) Co., Ltd.
Address of Shanghai Branch (Add): Building 4, 626 Baoyuan Fifth Road, Jiading District, Shanghai
Jiangxi Branch: Guangcai Label (Jiangxi) Co., Ltd
Jiangxi Branch Address (Add): Within the Pharmaceutical and Chemical Industry Base of Tianfan Street Industrial Park, Poyang County, Shangrao City, Jiangxi Province
Wechat Public
Copyright©2023 Guangzhou Guangcai Label Co., Ltd. ALL RIGHTS RESERVED. | SEO Tags | Business License | Cloud information | city substation
Copyright©2023 Guangzhou Guangcai Label Co., Ltd. ALL RIGHTS RESERVED. | SEO Tags | Business License | Cloud information | city substation