The company has always adhered to the "integrity, team, hard work, innovation" concept of the company, and constantly
surpass themselves. In line with the purpose of taking advantage of the society and serving the society, we will develop
together with our friends.
In order to enhance the fire safety awareness of Guangcai family members and new members, and adhere to the establishment of the "safety first" management concept, on May 5, 2022, the company organized a "safety development, prevention first" fire practice drill and knowledge training. Before the drill, the personnel department of the company strictly formulated the fire control plan and arranged the specific implementation plan of fire control. Clarify the specific location and responsibility requirements of each personnel, and repeatedly emphasize the importance of this fire drill and pay attention to the matters needing attention in the safety drill. During the drill, a complete plan was formulated to simulate the fire scene, so that the participants in the drill could experience the fire danger firsthand, and the instructors of the street fire brigade were invited to explain the use of fire extinguishers and matters needing attention, so that the participants in the drill correctly mastered the operation method of using fire fighting equipment to fight fires, and effectively improved the safety awareness and fire prevention skills of employees. Through this exercise, the safety awareness of the participants and the ability to fight against fires and emergency response were improved, how to wear gas masks and use fire extinguishers to effectively extinguish fires, and how to correctly use fire hydrants. During the practical operation, the organization and command potential of each exercise working group were also exercised. The drill was a complete success in a tense and orderly manner. The Guangcai People's Association has always maintained a good record of safe operation with joint efforts,
1. Wrong or missing characters 2. Image overcolor problem 3, binding problems Incomplete or non-working documents 5. The size of EPS and TIFF files in the whole page orchestration program is too large. 6, small color areas have not been converted into the correct color mode. 7. File format (may cause output confusion) 8. TIFF files have not been converted from red, green and blue mode to yellow, green and black four-color mode 9. Insufficient bleeding 10. The original used storage medium is not formatted. Have you encountered any of the above problems? The following are some of the situations summarized by Anmei Mall. Whether the characters used in the printing are marked in the 1. The name, version, number, and font (TrueType or Postscript) of all characters should be indicated, making sure that you are selecting the actual characters from the character menu (e. g. GaramondBold), rather than selecting a style such as "Bold" from the style menu. At the same time, the pre-press service provider or printer should be consulted about the requirements for character documents. In some RIPs, mutual interference between TrueType and Type1Postscript characters causes character substitution and string bits. 2. if all colors have been converted from red, green and blue to yellow and black If you do not convert the image to a yellow, blue and black pattern in your electronic file, the printed image may be black and white or have an unacceptable color cast. Remember that all colors are named in the file, and the image colors designed and introduced in the image processing program should also be guaranteed to use the same name exactly. Unless you plan to print small patches or common colors with spot color ink, you should be sure to use the yellow, cyan and black setting mode for all colors. As long as the full page layout program allows, small color block areas should also be converted to color mode. Whether the 3. can print bleeding when needed Anmei Mall found that it should be confirmed that all bleeding printing was extended to the edge of the page number as required by the printer. It is very convenient to realize image bleeding in a full page layout program, but it is relatively time-consuming and expensive to print. Whether the 4. has considered the original proofing of the document Black and white laser printouts or color proofs of the final document shall be delivered. If the document is delivered to the printing service provider via telephone line and modem, be sure to fax the laser print sample or deliver the sample sample at the same time. To confirm that the proofs were obtained from the same electronic document that was delivered to the printing service or printer. If the page is too large to print an original sample of the same size as the actual size, be sure to mark the reduced scale on the sample. Color prints should be printed on a laser printer with color separation proofs (in black and white). In addition to providing color proofs to printers, color separation proofs should also be provided, making sure that each color separation proof is correctly marked. And check the color separation sample color separation is correct and the color number of color separation. If black-and-white proofs are provided, the sections printed in different colors shall be clearly marked. 5. all notes noted The name, address and contact number shall be clearly stated on diskettes, portable media, printed proofs and proofs. In short, there should be a conspicuous mark on all documents or media delivered to the printing service or printer. At the same time, you should send a list of all documents or media you have transferred to the printing service or printer.
In the packaging and printing process, there are often different materials used to print the same or similar layout, such as the internal and external packaging, trademarks, instructions and other series of printed products. Generally, the color design of the graphic or logo of the printed layout is basically the same. However, due to the differences in the characteristics of the substrate, the printing equipment, ink performance and process form used by some products are not necessarily the same, and customers often require the printing color of the series of products to be basically consistent, and there can be no obvious color difference.
Point color refers to the use of C, M, Y, K ink other than the ink or by C, M, Y, K ink deployment of a single ink to copy the color of the printing process. Packaging printing often use spot colors to print large areas of the background color. So what kind of products will use spot color? The cover of a packaged product or book is often composed of uniform color blocks of different colors or regular gradual color display and text. These color blocks and text can be separated by using four-color primary color ink. You can also deploy spot color ink printing, and then print only a 1 of spot color inks at the same color block. In the case of comprehensive consideration to improve the printing quality and save the number of overprints, sometimes to choose the spot color ink to print. Four colors (usually composed of dots) are the printing process of C, M, Y and K inks (cyan, magenta, yellow and black) to reproduce various colors of color originals. What products use four-color printing? Under normal circumstances, the use of color photography to reflect the nature of the colorful color changes in the photos and human expressions, the artist's works of art or other images containing many different colors. For process requirements or for economic considerations, the painting 1 must be scanned by an electronic color separator or a color desktop system. Then the four-color printing process is used to complete the copy. What is the difference between the visual effect of the color block that spot color collides with four-color ink? The color of the ink prepared by spot color printing is obtained according to the principle of subtractive color mixing of pigments, and its color lightness is lower and saturation is higher. The solid bottom with uniform ink color adopts spot color printing. When the amount of ink is appropriately increased, the sensitivity of the change in the thickness of the ink layer to the color change will be reduced. So it is easier to get ink color uniform, thick printing effect.
In order to realize the company's long-term strategic layout needs and promote the implementation of the construction of innovative talents to strengthen the enterprise, the company cooperates with various colleges and universities to promote students' practical operation and employability. Through on-the-spot visits, training, exchanges and sharing, the company jointly builds a talent training base combining theory and practice, and realizes the win-win development of schools and enterprises.
Adhesive label structure The adhesive label is composed of cotton material, film material, adhesive and base material. The surface material is the carrier of the contents of the sticker, and the back is coated with glue. The film materials mainly include transparent polyester (PET), translucent polyester (PET), transparent oriented stretch polypropylene (OPP), translucent oriented stretch polypropylene (OPP) and transparent polyvinyl chloride (PVC);
The emergence of labels has greatly improved work efficiency and accelerated the pace of urban life. In the face of various printing methods, in order to shorten the equipment debugging time, improve productivity, improve product quality to a certain extent, and meet the needs of customers, label printing factories generally classify products according to different grades and different batches of daily necessities. Then use different printing methods for printing.
The epidemic is now affecting the hearts of every business and everyone. As enterprises from all over the country resume work one after another, the Chinese interview group of "Labeling and Labeling" has connected representative label printing enterprises to listen to how they have achieved both epidemic prevention and production in special periods.